Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 32 bytes [ 0.000000] c0_config2 = ffffffff80001743 [ 0.000000] Unified secondary cache 4096kB 4-way, linesize 32 bytes, waybit=0. [ 0.000000] Memory: 1981984k/2080768k available (5061k kernel code, 98784k reserved, 10377k data, 256k init, 0k highmem) [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptable hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:128 [ 0.000000] the old IO inten is 400 [ 0.000000] the new IO inten is ffff0400 [ 0.000000] init_IRQ done [ 0.000000] set clock event to periodic mode! [ 0.000000] hpet clock event device register [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty1] enabled, bootconsole disabled [ 0.000000] allocated 5242880 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.027343] Calibrating delay loop... 719.43 BogoMIPS (lpj=1404928) [ 0.113281] pid_max: default: 32768 minimum: 301 [ 0.113281] Mount-cache hash table entries: 1024 [ 0.113281] Initializing cgroup subsys memory [ 0.113281] Initializing cgroup subsys blkio [ 0.113281] Checking for the daddi bug... no. [ 0.117187] [ 0.117187] BOOT CPU#1... [ 0.117187] CPU 1, fn=ffffffff80213aa4, sp=980000017f0cfeb0, gp=980000017f0cc000 [ 0.128906] CPU revision is: 00006305 (ICT Loongson-3) [ 0.128906] FPU revision is: 00770501 [ 0.128906] c0_config1 = fffffffffee37193 [ 0.128906] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.128906] Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 32 bytes [ 0.128906] c0_config2 = ffffffff80001743 [ 0.128906] Unified secondary cache 4096kB 4-way, linesize 32 bytes, waybit=0. [ 0.128906] [ 0.128906] CPU#1 call init_secondary!!!! [ 0.128906] [ 0.128906] CPU#1 done init_secondary en=ffffffff!!!! [ 0.218750] [ 0.218750] loongson3_smp_finish, CPU#1 CP0_ST=1400fce1 [ 0.222656] [ 0.222656] BOOT CPU#2... [ 0.222656] CPU 2, fn=ffffffff80213aa4, sp=980000017f0e3eb0, gp=980000017f0e0000 [ 0.238281] CPU revision is: 00006305 (ICT Loongson-3) [ 0.238281] FPU revision is: 00770501 [ 0.238281] c0_config1 = fffffffffee37193 [ 0.238281] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.238281] Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 32 bytes [ 0.238281] c0_config2 = ffffffff80001743 [ 0.238281] Unified secondary cache 4096kB 4-way, linesize 32 bytes, waybit=0. [ 0.238281] [ 0.238281] CPU#2 call init_secondary!!!! [ 0.238281] [ 0.238281] CPU#2 done init_secondary en=ffffffff!!!! [ 0.328125] [ 0.328125] loongson3_smp_finish, CPU#2 CP0_ST=1400fce1 [ 0.332031] [ 0.332031] BOOT CPU#3... [ 0.332031] CPU 3, fn=ffffffff80213aa4, sp=980000017f0f7eb0, gp=980000017f0f4000 [ 0.351562] CPU revision is: 00006305 (ICT Loongson-3) [ 0.351562] FPU revision is: 00770501 [ 0.351562] c0_config1 = fffffffffee37193 [ 0.351562] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.351562] Primary data cache 64kB, 4-way, VIPT, no aliases, linesize 32 bytes [ 0.351562] c0_config2 = ffffffff80001743 [ 0.351562] Unified secondary cache 4096kB 4-way, linesize 32 bytes, waybit=0. [ 0.351562] [ 0.351562] CPU#3 call init_secondary!!!! [ 0.351562] [ 0.351562] CPU#3 done init_secondary en=ffffffff!!!! [ 0.441406] [ 0.441406] loongson3_smp_finish, CPU#3 CP0_ST=1400fce1 [ 0.441406] Brought up 4 CPUs [ 0.441406] devtmpfs: initialized [ 0.441406] NET: Registered protocol family 16 [ 0.472656] bio: create slab at 0 [ 0.472656] vgaarb: loaded [ 0.476562] SCSI subsystem initialized [ 0.476562] libata version 3.00 loaded. [ 0.476562] usbcore: registered new interface driver usbfs [ 0.476562] usbcore: registered new interface driver hub [ 0.476562] usbcore: registered new device driver usb [ 0.480468] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.480468] pci 0000:00:04.0: PME# disabled [ 0.480468] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.480468] pci 0000:00:05.0: PME# disabled [ 0.480468] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.480468] pci 0000:00:06.0: PME# disabled [ 0.480468] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.480468] pci 0000:00:07.0: PME# disabled [ 0.480468] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.480468] pci 0000:00:09.0: PME# disabled [ 0.480468] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.480468] pci 0000:00:0a.0: PME# disabled [ 0.480468] pci 0000:00:11.0: reg 10: [io 0x10058-0x1005f] [ 0.480468] pci 0000:00:11.0: reg 14: [io 0x10050-0x10053] [ 0.480468] pci 0000:00:11.0: reg 18: [io 0x10048-0x1004f] [ 0.480468] pci 0000:00:11.0: reg 1c: [io 0x10040-0x10043] [ 0.480468] pci 0000:00:11.0: reg 20: [io 0x10010-0x1001f] [ 0.480468] pci 0000:00:11.0: reg 24: [mem 0x1c809000-0x1c8093ff] [ 0.480468] pci 0000:00:11.0: set SATA to AHCI mode [ 0.480468] pci 0000:00:12.0: reg 10: [mem 0x1c808000-0x1c808fff] [ 0.480468] pci 0000:00:12.1: reg 10: [mem 0x1c807000-0x1c807fff] [ 0.480468] pci 0000:00:12.2: reg 10: [mem 0x00000000-0x000000ff] [ 0.480468] pci 0000:00:12.2: supports D1 D2 [ 0.480468] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.480468] pci 0000:00:12.2: PME# disabled [ 0.480468] pci 0000:00:13.0: reg 10: [mem 0x1c806000-0x1c806fff] [ 0.480468] pci 0000:00:13.1: reg 10: [mem 0x1c805000-0x1c805fff] [ 0.480468] pci 0000:00:13.2: reg 10: [mem 0x00000000-0x000000ff] [ 0.480468] pci 0000:00:13.2: supports D1 D2 [ 0.480468] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.480468] pci 0000:00:13.2: PME# disabled [ 0.480468] pci 0000:00:14.1: reg 10: [io 0x0038-0x003f] [ 0.480468] pci 0000:00:14.1: reg 14: [io 0x0030-0x0033] [ 0.480468] pci 0000:00:14.1: reg 18: [io 0x0028-0x002f] [ 0.480468] pci 0000:00:14.1: reg 1c: [io 0x0020-0x0023] [ 0.480468] pci 0000:00:14.1: reg 20: [io 0x0000-0x000f] [ 0.480468] pci 0000:00:14.2: reg 10: [mem 0x1c800000-0x1c803fff 64bit] [ 0.480468] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.480468] pci 0000:00:14.2: PME# disabled [ 0.480468] pci 0000:00:14.5: reg 10: [mem 0x1c804000-0x1c804fff] [ 0.480468] pci 0000:01:05.0: reg 10: [mem 0x10000000-0x17ffffff pref] [ 0.480468] pci 0000:01:05.0: reg 14: [io 0xf000-0xf0ff] [ 0.480468] pci 0000:01:05.0: reg 18: [mem 0x1c000000-0x1c00ffff] [ 0.480468] pci 0000:01:05.0: supports D1 D2 [ 0.484375] pci 0000:02:00.0: reg 10: [io 0xe000-0xe0ff] [ 0.484375] pci 0000:02:00.0: reg 18: [mem 0x1c724000-0x1c724fff 64bit] [ 0.484375] pci 0000:02:00.0: reg 20: [mem 0x1c720000-0x1c723fff 64bit pref] [ 0.484375] pci 0000:02:00.0: reg 30: [mem 0x1c700000-0x1c71ffff pref] [ 0.484375] pci 0000:02:00.0: supports D1 D2 [ 0.484375] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.484375] pci 0000:02:00.0: PME# disabled [ 0.484375] pci 0000:04:00.0: reg 10: [mem 0x1c500000-0x1c50ffff 64bit] [ 0.484375] pci 0000:04:00.0: supports D1 [ 0.484375] pci 0000:04:00.0: PME# supported from D0 D1 D3hot [ 0.484375] pci 0000:04:00.0: PME# disabled [ 0.488281] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.492187] pci 0000:00:01.0: BAR 9: assigned [mem 0x40000000-0x47ffffff pref] [ 0.492187] pci 0000:00:01.0: BAR 8: assigned [mem 0x48000000-0x480fffff] [ 0.492187] pci 0000:00:04.0: BAR 8: assigned [mem 0x48100000-0x481fffff] [ 0.492187] pci 0000:00:04.0: BAR 9: assigned [mem 0x48200000-0x482fffff pref] [ 0.492187] pci 0000:00:06.0: BAR 8: assigned [mem 0x48300000-0x483fffff] [ 0.492187] pci 0000:00:14.2: BAR 0: assigned [mem 0x48400000-0x48403fff 64bit] [ 0.492187] pci 0000:00:14.2: BAR 0: set to [mem 0x48400000-0x48403fff 64bit] (PCI address [0x48400000-0x48403fff] [ 0.492187] pci 0000:00:01.0: BAR 7: assigned [io 0x4000-0x4fff] [ 0.492187] pci 0000:00:04.0: BAR 7: assigned [io 0x5000-0x5fff] [ 0.492187] pci 0000:00:12.0: BAR 0: assigned [mem 0x48404000-0x48404fff] [ 0.492187] pci 0000:00:12.0: BAR 0: set to [mem 0x48404000-0x48404fff] (PCI address [0x48404000-0x48404fff] [ 0.492187] pci 0000:00:12.1: BAR 0: assigned [mem 0x48405000-0x48405fff] [ 0.492187] pci 0000:00:12.1: BAR 0: set to [mem 0x48405000-0x48405fff] (PCI address [0x48405000-0x48405fff] [ 0.492187] pci 0000:00:13.0: BAR 0: assigned [mem 0x48406000-0x48406fff] [ 0.492187] pci 0000:00:13.0: BAR 0: set to [mem 0x48406000-0x48406fff] (PCI address [0x48406000-0x48406fff] [ 0.492187] pci 0000:00:13.1: BAR 0: assigned [mem 0x48407000-0x48407fff] [ 0.492187] pci 0000:00:13.1: BAR 0: set to [mem 0x48407000-0x48407fff] (PCI address [0x48407000-0x48407fff] [ 0.492187] pci 0000:00:14.5: BAR 0: assigned [mem 0x48408000-0x48408fff] [ 0.492187] pci 0000:00:14.5: BAR 0: set to [mem 0x48408000-0x48408fff] (PCI address [0x48408000-0x48408fff] [ 0.492187] pci 0000:00:11.0: BAR 5: assigned [mem 0x48409000-0x484093ff] [ 0.492187] pci 0000:00:11.0: BAR 5: set to [mem 0x48409000-0x484093ff] (PCI address [0x48409000-0x484093ff] [ 0.492187] pci 0000:00:12.2: BAR 0: assigned [mem 0x48409400-0x484094ff] [ 0.492187] pci 0000:00:12.2: BAR 0: set to [mem 0x48409400-0x484094ff] (PCI address [0x48409400-0x484094ff] [ 0.492187] pci 0000:00:13.2: BAR 0: assigned [mem 0x48409500-0x484095ff] [ 0.492187] pci 0000:00:13.2: BAR 0: set to [mem 0x48409500-0x484095ff] (PCI address [0x48409500-0x484095ff] [ 0.496093] pci 0000:00:11.0: BAR 4: assigned [io 0x6000-0x600f] [ 0.496093] pci 0000:00:11.0: BAR 4: set to [io 0x6000-0x600f] (PCI address [0x6000-0x600f] [ 0.496093] pci 0000:00:14.1: BAR 4: assigned [io 0x6010-0x601f] [ 0.496093] pci 0000:00:14.1: BAR 4: set to [io 0x6010-0x601f] (PCI address [0x6010-0x601f] [ 0.496093] pci 0000:00:11.0: BAR 0: assigned [io 0x6020-0x6027] [ 0.496093] pci 0000:00:11.0: BAR 0: set to [io 0x6020-0x6027] (PCI address [0x6020-0x6027] [ 0.496093] pci 0000:00:11.0: BAR 2: assigned [io 0x6028-0x602f] [ 0.496093] pci 0000:00:11.0: BAR 2: set to [io 0x6028-0x602f] (PCI address [0x6028-0x602f] [ 0.496093] pci 0000:00:11.0: BAR 1: assigned [io 0x6030-0x6033] [ 0.496093] pci 0000:00:11.0: BAR 1: set to [io 0x6030-0x6033] (PCI address [0x6030-0x6033] [ 0.496093] pci 0000:00:11.0: BAR 3: assigned [io 0x6034-0x6037] [ 0.496093] pci 0000:00:11.0: BAR 3: set to [io 0x6034-0x6037] (PCI address [0x6034-0x6037] [ 0.496093] pci 0000:01:05.0: BAR 0: assigned [mem 0x40000000-0x47ffffff pref] [ 0.496093] pci 0000:01:05.0: BAR 0: set to [mem 0x40000000-0x47ffffff pref] (PCI address [0x40000000-0x47ffffff] [ 0.496093] pci 0000:01:05.0: BAR 2: assigned [mem 0x48000000-0x4800ffff] [ 0.496093] pci 0000:01:05.0: BAR 2: set to [mem 0x48000000-0x4800ffff] (PCI address [0x48000000-0x4800ffff] [ 0.496093] pci 0000:01:05.0: BAR 1: assigned [io 0x4000-0x40ff] [ 0.496093] pci 0000:01:05.0: BAR 1: set to [io 0x4000-0x40ff] (PCI address [0x4000-0x40ff] [ 0.496093] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.496093] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] [ 0.496093] pci 0000:00:01.0: bridge window [mem 0x48000000-0x480fffff] [ 0.496093] pci 0000:00:01.0: bridge window [mem 0x40000000-0x47ffffff pref] [ 0.496093] pci 0000:02:00.0: BAR 6: assigned [mem 0x48200000-0x4821ffff pref] [ 0.496093] pci 0000:02:00.0: BAR 6: set to [mem 0x48200000-0x4821ffff pref] (PCI address [0x48200000-0x4821ffff] [ 0.496093] pci 0000:02:00.0: BAR 4: assigned [mem 0x48220000-0x48223fff 64bit pref] [ 0.496093] pci 0000:02:00.0: BAR 4: set to [mem 0x48220000-0x48223fff 64bit pref] (PCI address [0x48220000-0x48223fff] [ 0.496093] pci 0000:02:00.0: BAR 2: assigned [mem 0x48100000-0x48100fff 64bit] [ 0.496093] pci 0000:02:00.0: BAR 2: set to [mem 0x48100000-0x48100fff 64bit] (PCI address [0x48100000-0x48100fff] [ 0.496093] pci 0000:02:00.0: BAR 0: assigned [io 0x5000-0x50ff] [ 0.496093] pci 0000:02:00.0: BAR 0: set to [io 0x5000-0x50ff] (PCI address [0x5000-0x50ff] [ 0.496093] pci 0000:00:04.0: PCI bridge to [bus 02-02] [ 0.496093] pci 0000:00:04.0: bridge window [io 0x5000-0x5fff] [ 0.496093] pci 0000:00:04.0: bridge window [mem 0x48100000-0x481fffff] [ 0.496093] pci 0000:00:04.0: bridge window [mem 0x48200000-0x482fffff pref] [ 0.496093] pci 0000:00:05.0: PCI bridge to [bus 03-03] [ 0.496093] pci 0000:00:05.0: bridge window [io disabled] [ 0.496093] pci 0000:00:05.0: bridge window [mem disabled] [ 0.496093] pci 0000:00:05.0: bridge window [mem pref disabled] [ 0.496093] pci 0000:04:00.0: BAR 0: assigned [mem 0x48300000-0x4830ffff 64bit] [ 0.496093] pci 0000:04:00.0: BAR 0: set to [mem 0x48300000-0x4830ffff 64bit] (PCI address [0x48300000-0x4830ffff] [ 0.496093] pci 0000:00:06.0: PCI bridge to [bus 04-04] [ 0.496093] pci 0000:00:06.0: bridge window [io disabled] [ 0.496093] pci 0000:00:06.0: bridge window [mem 0x48300000-0x483fffff] [ 0.496093] pci 0000:00:06.0: bridge window [mem pref disabled] [ 0.496093] pci 0000:00:07.0: PCI bridge to [bus 05-05] [ 0.496093] pci 0000:00:07.0: bridge window [io disabled] [ 0.496093] pci 0000:00:07.0: bridge window [mem disabled] [ 0.496093] pci 0000:00:07.0: bridge window [mem pref disabled] [ 0.496093] pci 0000:00:09.0: PCI bridge to [bus 06-06] [ 0.496093] pci 0000:00:09.0: bridge window [io disabled] [ 0.496093] pci 0000:00:09.0: bridge window [mem disabled] [ 0.496093] pci 0000:00:09.0: bridge window [mem pref disabled] [ 0.500000] pci 0000:00:0a.0: PCI bridge to [bus 07-07] [ 0.500000] pci 0000:00:0a.0: bridge window [io disabled] [ 0.500000] pci 0000:00:0a.0: bridge window [mem disabled] [ 0.500000] pci 0000:00:0a.0: bridge window [mem pref disabled] [ 0.500000] pci 0000:00:14.4: PCI bridge to [bus 08-08] [ 0.500000] pci 0000:00:14.4: bridge window [io disabled] [ 0.500000] pci 0000:00:14.4: bridge window [mem disabled] [ 0.500000] pci 0000:00:14.4: bridge window [mem pref disabled] [ 0.500000] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 0.500000] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 0.500000] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 0.500000] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 0.500000] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 0.500000] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 0.500000] Fixup: bus0 dev11h fun0h 1002:4390 irq 4 [ 0.500000] Fixup: bus0 dev12h fun0h 1002:4397 irq 6 [ 0.500000] Fixup: bus0 dev12h fun1h 1002:4398 irq 6 [ 0.500000] Fixup: bus0 dev12h fun2h 1002:4396 irq 6 [ 0.500000] Fixup: bus0 dev13h fun0h 1002:4397 irq 6 [ 0.500000] Fixup: bus0 dev13h fun1h 1002:4398 irq 6 [ 0.500000] Fixup: bus0 dev13h fun2h 1002:4396 irq 6 [ 0.500000] Fixup: bus0 dev14h fun1h 1002:439c irq 0 [ 0.500000] Fixup: bus0 dev14h fun2h 1002:4383 irq 5 [ 0.500000] Fixup: bus0 dev14h fun5h 1002:4399 irq 6 [ 0.500000] Fixup: bus1 dev5h fun0h 1002:9615 irq 6 [ 0.500000] Fixup: bus2 dev0h fun0h 10ec:8168 irq 3 [ 0.500000] Fixup: bus4 dev0h fun0h 168c:2b irq 6 [ 0.500000] Switching to clocksource hpet [ 0.503906] set clock event to one shot mode! [ 0.523437] NET: Registered protocol family 2 [ 0.523437] IP route cache hash table entries: 16384 (order: 3, 131072 bytes) [ 0.527343] TCP established hash table entries: 65536 (order: 6, 1048576 bytes) [ 0.531250] TCP bind hash table entries: 65536 (order: 6, 1048576 bytes) [ 0.535156] TCP: Hash tables configured (established 65536 bind 65536) [ 0.535156] TCP reno registered [ 0.535156] UDP hash table entries: 1024 (order: 1, 32768 bytes) [ 0.535156] UDP-Lite hash table entries: 1024 (order: 1, 32768 bytes) [ 0.535156] NET: Registered protocol family 1 [ 0.535156] PCI: CLS 32 bytes, default 32 [ 0.535156] cpufreq: Loongson-2F CPU frequency driver. [ 0.539062] audit: initializing netlink socket (disabled) [ 0.539062] type=2000 audit(1350465765.535:1): initialized [ 0.554687] VFS: Disk quotas dquot_6.5.2 [ 0.554687] Dquot-cache hash table entries: 2048 (order 0, 16384 bytes) [ 0.558593] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.562500] fuse init (API version 7.15) [ 0.562500] msgmni has been set to 3871 [ 0.566406] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.566406] io scheduler noop registered [ 0.566406] io scheduler cfq registered (default) [ 0.582031] [drm] Initialized drm 1.1.0 20060810 [ 0.582031] [drm] radeon defaulting to kernel modesetting. [ 0.582031] [drm] radeon kernel modesetting enabled. [ 0.582031] PCI: Setting latency timer of device 0000:01:05.0 to 64 [ 0.601562] [drm] initializing kernel modesetting (RS780 0x1002:0x9615). [ 0.605468] [drm] register mmio base: 0x48000000 [ 0.605468] [drm] register mmio size: 65536 [ 0.605468] radeon 0000:01:05.0: BAR 6: can't assign [??? 0x00000000 flags 0x0] (bogus alignment) [ 0.605468] ATOM BIOS: BR039866 [ 0.605468] radeon 0000:01:05.0: VRAM: 128M 0x10000000 - 0x17FFFFFF (128M used) [ 0.605468] radeon 0000:01:05.0: GTT: 512M 0x18000000 - 0x37FFFFFF [ 0.605468] [drm] No integrated system info for your GPU, using safe default [ 0.605468] [drm] Unsupported IGP table: 1 4 [ 0.605468] [drm] Detected VRAM RAM=128M, BAR=128M [ 0.605468] [drm] RAM width 32bits DDR [ 0.605468] [TTM] Zone kernel: Available graphics memory: 990992 kiB. [ 0.605468] [TTM] Initializing pool allocator. [ 0.609375] [drm] radeon: 128M of VRAM memory ready [ 0.609375] [drm] radeon: 512M of GTT memory ready. [ 0.609375] [drm] radeon: irq initialized. [ 0.609375] [drm] GART: num cpu pages 32768, num gpu pages 131072 [ 0.609375] [drm] Loading RS780 Microcode [ 0.648437] radeon 0000:01:05.0: WB enabled [ 0.683593] [drm] ring test succeeded in 0 usecs [ 0.683593] [drm] radeon: ib pool ready. [ 0.683593] [drm] ib test succeeded in 0 usecs [ 0.683593] [drm] Enabling audio support [ 0.687500] [drm] Radeon Display Connectors [ 0.687500] [drm] Connector 0: [ 0.687500] [drm] LVDS [ 0.687500] [drm] Encoders: [ 0.687500] [drm] LCD1: INTERNAL_KLDSCP_LVTMA [ 0.687500] [drm] Connector 1: [ 0.687500] [drm] VGA [ 0.687500] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 0.687500] [drm] Encoders: [ 0.687500] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 0.687500] [drm] radeon: power management initialized [ 1.695312] [drm] fb mappable at 0x40148000 [ 1.695312] [drm] vram apper at 0x40000000 [ 1.695312] [drm] size 2162688 [ 1.695312] [drm] fb depth is 16 [ 1.695312] [drm] pitch is 2816 [ 1.867187] Console: switching to colour frame buffer device 170x48 [ 2.011718] fb0: radeondrmfb frame buffer device [ 2.011718] drm: registered panic notifier [ 2.011718] [drm] Initialized radeon 2.7.1 20080528 for 0000:01:05.0 on minor 0 [ 2.015625] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.039062] serial8250.0: ttyS0 at MMIO 0x0 (irq = 58) is a 16550A [ 2.054687] brd: module loaded [ 2.062500] loop: module loaded [ 2.066406] ahci 0000:00:11.0: version 3.0 [ 2.066406] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 2.066406] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 2.070312] scsi0 : ahci [ 2.070312] scsi1 : ahci [ 2.074218] scsi2 : ahci [ 2.074218] scsi3 : ahci [ 2.074218] ata1: SATA max UDMA/133 abar m1024@0x48409000 port 0x48409100 irq 4 [ 2.078125] ata2: SATA max UDMA/133 abar m1024@0x48409000 port 0x48409180 irq 4 [ 2.078125] ata3: SATA max UDMA/133 abar m1024@0x48409000 port 0x48409200 irq 4 [ 2.082031] ata4: SATA max UDMA/133 abar m1024@0x48409000 port 0x48409280 irq 4 [ 2.597656] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.667968] ata1.00: ATA-8: WDC WD3200BPVT-75JJ5T0, 03.01A03, max UDMA/133 [ 2.695312] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.730468] ata1.00: configured for UDMA/133 [ 2.789062] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BPVT-7 03.0 PQ: 0 ANSI: 5 [ 2.820312] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.851562] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.882812] sd 0:0:0:0: [sda] Write Protect is off [ 2.882812] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.945312] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.945312] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.074218] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > [ 3.113281] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.265625] ata2: SATA link down (SStatus 0 SControl 300) [ 3.648437] ata3: SATA link down (SStatus 0 SControl 300) [ 4.031250] ata4: SATA link down (SStatus 0 SControl 300) [ 4.082031] scsi4 : pata_atiixp [ 4.117187] scsi5 : pata_atiixp [ 4.148437] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6010 irq 14 [ 4.183593] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6018 irq 15 [ 4.562500] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.7-k2 [ 4.593750] e1000e: Copyright (c) 1999 - 2010 Intel Corporation. [ 4.628906] r8168 Gigabit Ethernet driver 8.031.00 loaded [ 4.664062] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 4.664062] r8168 0000:02:00.0: no MSI. Back to INTx. [ 4.699218] eth%d: RTL8168D/8111D at 0x9000000048100000, 00:23:9e:02:cf:5e, IRQ 3 [ 4.808593] r8168: This product is covered by one or more of the following patents: US5,307,459, US5,434,872, US5,732,094, US6,570,884, US6,115,776, and US6,327,625. [ 4.847656] eth0: Identified chip type is 'RTL8168D/8111D'. [ 4.847656] r8168 Copyright (C) 2012 Realtek NIC software team [ 4.847656] This program comes with ABSOLUTELY NO WARRANTY; for details, please see . [ 4.847656] This is free software, and you are welcome to redistribute it under certain conditions; see . [ 4.976562] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.019531] PCI: Enabling device 0000:00:12.2 (0000 -> 0002) [ 5.062500] PCI: Setting latency timer of device 0000:00:12.2 to 64 [ 5.062500] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 5.105468] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 5.148437] ehci_hcd 0000:00:12.2: debug port 1 [ 5.191406] ehci_hcd 0000:00:12.2: irq 6, io mem 0x48409400 [ 5.250000] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 5.292968] hub 1-0:1.0: USB hub found [ 5.332031] hub 1-0:1.0: 6 ports detected [ 5.375000] PCI: Enabling device 0000:00:13.2 (0000 -> 0002) [ 5.421875] PCI: Setting latency timer of device 0000:00:13.2 to 64 [ 5.421875] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 5.464843] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 5.511718] ehci_hcd 0000:00:13.2: debug port 1 [ 5.554687] ehci_hcd 0000:00:13.2: irq 6, io mem 0x48409500 [ 5.605468] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 5.648437] hub 2-0:1.0: USB hub found [ 5.695312] hub 2-0:1.0: 6 ports detected [ 5.738281] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.765625] usb 1-4: new high speed USB device using ehci_hcd and address 2 [ 5.828125] PCI: Enabling device 0000:00:12.0 (0140 -> 0142) [ 5.875000] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 5.917968] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 5.960937] ohci_hcd 0000:00:12.0: irq 6, io mem 0x48404000 [ 6.023437] hub 3-0:1.0: USB hub found [ 6.066406] hub 3-0:1.0: 3 ports detected [ 6.109375] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 6.152343] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 6.199218] ohci_hcd 0000:00:12.1: irq 6, io mem 0x48405000 [ 6.234375] usb 1-5: new high speed USB device using ehci_hcd and address 3 [ 6.347656] hub 4-0:1.0: USB hub found [ 6.390625] hub 4-0:1.0: 3 ports detected [ 6.437500] PCI: Enabling device 0000:00:13.0 (0140 -> 0142) [ 6.484375] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 6.527343] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 6.574218] ohci_hcd 0000:00:13.0: irq 6, io mem 0x48406000 [ 6.683593] hub 5-0:1.0: USB hub found [ 6.726562] hub 5-0:1.0: 3 ports detected [ 6.773437] PCI: Enabling device 0000:00:13.1 (0140 -> 0142) [ 6.816406] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 6.859375] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 6.902343] ohci_hcd 0000:00:13.1: irq 6, io mem 0x48407000 [ 7.003906] hub 6-0:1.0: USB hub found [ 7.042968] hub 6-0:1.0: 3 ports detected [ 7.078125] PCI: Enabling device 0000:00:14.5 (0140 -> 0142) [ 7.117187] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 7.152343] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 7.191406] ohci_hcd 0000:00:14.5: irq 6, io mem 0x48408000 [ 7.289062] hub 7-0:1.0: USB hub found [ 7.324218] hub 7-0:1.0: 2 ports detected [ 7.363281] Initializing USB Mass Storage driver... [ 7.398437] scsi6 : usb-storage 1-5:1.0 [ 7.437500] usbcore: registered new interface driver usb-storage [ 7.476562] USB Mass Storage support registered. [ 7.527343] i8042.c: Detected active multiplexing controller, rev 1.1. [ 7.570312] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 7.609375] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 7.644531] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 7.683593] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 7.718750] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 7.757812] mice: PS/2 mouse device common for all mice [ 7.792968] logibm.c: Didn't find Logitech busmouse at 0x23c [ 7.832031] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 7.867187] rtc0: alarms up to one day, 114 bytes nvram [ 7.902343] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x1000, revision 0 [ 7.941406] usbcore: registered new interface driver hiddev [ 7.980468] usbcore: registered new interface driver usbhid [ 8.015625] usbhid: USB HID core driver [ 8.054687] Lemote Laptop Support version 1.11 [ 8.097656] Lemote Laptop Platform Driver: The battery does not exist!! [ 8.144531] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 8.199218] input: Lemote Laptop Hotkeys as /devices/virtual/input/input1 [ 8.230468] Lemote Laptop Platform Driver: PCI Init successful! [ 8.230468] Lemote Laptop Platform Driver: SCI event handler init. [ 8.234375] TCP bic registered [ 8.234375] TCP cubic registered [ 8.234375] TCP westwood registered [ 8.234375] TCP htcp registered [ 8.234375] Initializing XFRM netlink socket [ 8.234375] NET: Registered protocol family 17 [ 8.234375] NET: Registered protocol family 15 [ 8.234375] Loongson Hwmon Enter... [ 8.234375] success to attach EMC1412 sensor [ 8.234375] cpuautoplug: Loongson-3A CPU autoplug driver. [ 8.265625] registered taskstats version 1 [ 8.445312] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 8.714843] rtc_cmos rtc_cmos: setting system clock to 2012-10-17 09:22:54 UTC (1350465774) [ 8.714843] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 8.789062] atkbd serio1: keyboard reset failed on isa0060/serio1 [ 8.824218] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 8.949218] EXT3-fs (sda7): error: couldn't mount because of unsupported optional features (240) [ 8.988281] EXT2-fs (sda7): error: couldn't mount because of unsupported optional features (240) [ 9.054687] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 9.093750] VFS: Mounted root (ext4 filesystem) readonly on device 8:7. [ 9.164062] devtmpfs: mounted [ 9.203125] Freeing unused kernel memory: 256k freed [ 9.339843] atkbd serio3: keyboard reset failed on isa0060/serio3 [ 9.382812] atkbd serio4: keyboard reset failed on isa0060/serio4 [ 9.839843] Finger Sensing Pad, hw: 12.1.1, sw: 1.0.0-K, buttons: 4 [ 10.386718] input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/i8042/serio2/input/input2 [ 12.898437] udev[802]: starting version 164 [ 13.339843] Linux video capture interface: v2.00 [ 13.578125] cfg80211: Calling CRDA to update world regulatory domain [ 13.597656] uvcvideo: Found UVC 1.00 device USB2.0-Camera (0bda:5801) [ 13.609375] input: USB2.0-Camera as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.0/input/input3 [ 13.609375] usbcore: registered new interface driver uvcvideo [ 13.609375] USB Video Class driver (v0.1.0) [ 15.113281] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 15.179687] ath: EEPROM regdomain: 0x65 [ 15.179687] ath: EEPROM indicates we should expect a direct regpair map [ 15.179687] ath: Country alpha2 being used: 00 [ 15.179687] ath: Regpair used: 0x65 [ 15.230468] phy0: Selected rate control algorithm 'ath9k_rate_control' [ 15.230468] Registered led device: ath9k-phy0::radio [ 15.230468] Registered led device: ath9k-phy0::assoc [ 15.230468] Registered led device: ath9k-phy0::tx [ 15.230468] Registered led device: ath9k-phy0::rx [ 15.230468] phy0: Atheros AR9285 Rev:2 mem=0x9000000048300000, irq=6 [ 18.238281] EXT4-fs (sda7): re-mounted. Opts: (null) [ 18.898437] Adding 2104496k swap on /dev/sda3. Priority:-1 extents:1 across:2104496k [ 19.261718] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 23.781250] r8168: eth0: link down [ 24.648437] NET: Registered protocol family 10 [ 24.648437] lo: Disabled Privacy Extensions [ 24.652343] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 25.324218] RPC: Registered udp transport module. [ 25.324218] RPC: Registered tcp transport module. [ 25.324218] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 25.445312] r8168: eth0: link up [ 25.445312] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 25.789062] r8168: eth0: link up [ 27.703125] Disable clock for CPU3 [ 28.183593] CPUFREQ: Per core conservative sysfs interface is deprecated - down_threshold [ 28.183593] CPUFREQ: Per core conservative sysfs interface is deprecated - up_threshold [ 28.187500] CPUFREQ: Per core conservative sysfs interface is deprecated - ignore_nice_load [ 28.187500] CPUFREQ: Per core conservative sysfs interface is deprecated - sampling_down_factor