# Path to the voltage table sysfs interface file 
# The init script will detect which one of the 2 below file exists and use the correspond table 
VTABLE_PATH_0_2_X="/sys/devices/system/cpu/cpu0/cpufreq/op_points_table"
VTABLE_PATH_0_3_X="/sys/devices/system/cpu/cpu0/cpufreq/phc_controls"
VTABLE_PATH_0_4_X="/sys/devices/system/cpu/cpu0/cpufreq/phc_vids"

# Switch back to DEFAULT_VTABLE if undervoltage is stopped? [yes/no]
SWITCH_BACK="yes"

# Default voltages that will be restored at shutdown if SWITCH_BACK=yes
# Linux PHC 0.2.x uses a table of Frequency:Voltage pairs
# Linux PHC 0.3.x uses a table of FID:VID pairs

DEFAULT_VTABLE_0_4_X="35 30 25 19"

# max freq rounding error at 19, which is also the minimum for all freqs
CUSTOM_VTABLE_0_4_X="21 19 19 19"

# Set the following to "yes" when the all the settings are configured
# This is a safety to disable setting the voltages with the default
# values of this file that are probably wrong for your CPU 
IS_CONFIGURED="yes"